- Add EC interface, use ALT-] key to enter EC access. RU will try to detect EC_SC and EC_DATA.
- Fix ALT-8 always reads MTRRs only on 5.22
- Add ACPI ALT-6 DSDT table
- ACPI UI: Add Page number for large ACPI table such as DSDT
Password: "61016253441046 " (no quotation marks, a space character followed after the numbers)
15 則留言:
The password is incorrect
I try the password and it works. Can you please check again?
The password is indeed incorrect.
You have to type space after 6.
So the password is without quotes:
"61016253441046 "
Oops, you are right!
I just copied and pasted the password, not realized there is an extra space at the end. Thanks!
Hi I am SIO vendor Fintek's FAE, Angus
Would you please add vendor : Fintek by recognizing global index 23h/24h = 19h/34h?
Thank you.
Hi Angus,
No problem, I will add it in next release.
Hi James,
我在APL上面使用以下方式讀取SMBUS SLAVE ADDR 0x40或0xC0都會有問題
ALT 0 -> (1) Byte -> SlaveAddresss -> 0xC0
ALT 0 -> (1) Byte -> SlaveAddresss -> 0x40
但5.22.0354這板(含)之前是好的
而5.23.0363.zip這版(含)之後全部都壞掉
Hi Unknown,
Thank you for the notification. I will check why SMBUS not working after 5.23.
Hi James,
我是上面的Unknown
感謝你回應此問題
Aries
Hi Aries,
I can't find APL board and I can't reproduce the problem yet. I will check the differences between 5.23 then.
Hi Aries,
Regarding the SMBUS problem, did RU read the SPD data all 0xff?
Hi Aries,
Also, What are the parameters of SMBUS? Such as base, slave address?
Hi James,
Sorry for the late reply.
SPD read is OK on 5.22/5.23.
For the failure symptom on 5.23, please check the video below:
https://www.youtube.com/watch?v=GPRVj3cohcU
On the same board, ru SMBUS read is OK with 5.22.
Please refer the successful video on the link.
https://www.youtube.com/watch?v=dKQGwEzUXA4
Aries
Hi Aries,
Thanks for the video, that really helps me to reproduce the problem.
I have fixed it and it will be released in the next version.
Hi James,
Got it and thank you very much.
Aries
張貼留言