- Add EC interface, use ALT-] key to enter EC access. RU will try to detect EC_SC and EC_DATA.
- Fix ALT-8 always reads MTRRs only on 5.22
- Add ACPI ALT-6 DSDT table
- ACPI UI: Add Page number for large ACPI table such as DSDT
Password: "61016253441046 " (no quotation marks, a space character followed after the numbers)
The password is incorrect
回覆刪除I try the password and it works. Can you please check again?
回覆刪除The password is indeed incorrect.
回覆刪除You have to type space after 6.
So the password is without quotes:
"61016253441046 "
Oops, you are right!
回覆刪除I just copied and pasted the password, not realized there is an extra space at the end. Thanks!
Hi I am SIO vendor Fintek's FAE, Angus
回覆刪除Would you please add vendor : Fintek by recognizing global index 23h/24h = 19h/34h?
Thank you.
Hi Angus,
回覆刪除No problem, I will add it in next release.
Hi James,
回覆刪除我在APL上面使用以下方式讀取SMBUS SLAVE ADDR 0x40或0xC0都會有問題
ALT 0 -> (1) Byte -> SlaveAddresss -> 0xC0
ALT 0 -> (1) Byte -> SlaveAddresss -> 0x40
但5.22.0354這板(含)之前是好的
而5.23.0363.zip這版(含)之後全部都壞掉
Hi Unknown,
回覆刪除Thank you for the notification. I will check why SMBUS not working after 5.23.
Hi James,
回覆刪除我是上面的Unknown
感謝你回應此問題
Aries
Hi Aries,
回覆刪除I can't find APL board and I can't reproduce the problem yet. I will check the differences between 5.23 then.
Hi Aries,
回覆刪除Regarding the SMBUS problem, did RU read the SPD data all 0xff?
Hi Aries,
回覆刪除Also, What are the parameters of SMBUS? Such as base, slave address?
Hi James,
回覆刪除Sorry for the late reply.
SPD read is OK on 5.22/5.23.
For the failure symptom on 5.23, please check the video below:
https://www.youtube.com/watch?v=GPRVj3cohcU
On the same board, ru SMBUS read is OK with 5.22.
Please refer the successful video on the link.
https://www.youtube.com/watch?v=dKQGwEzUXA4
Aries
Hi Aries,
回覆刪除Thanks for the video, that really helps me to reproduce the problem.
I have fixed it and it will be released in the next version.
Hi James,
回覆刪除Got it and thank you very much.
Aries