- Fix it hangs while using UEFI variables ALT-=
- Ctrl-L (select color) can select screen/window/selection colors now, try it if you want to use different color
Ctrl-L to select color:
Monochrome color:
Select gray background: - Space key in register details screen (ENTER / ALT-L) will toggle a preview lines. Here is the toggling sequence: Bytes/Bits --> ASCII --> Close preview.
Hit space key once: Display the hex bytes
- Fix the scroll speed of text displayed on right side of menu bar is too fast
- Fix F8 compare memory always using address 0
- Add PCI Express Capabilities Register.bit8 Slot implemented information to info block
- Improve visibility for CTRL-L monochrome color (BTW, monochrome color was created for a coworker who is color blindness)
- Fix device name was not cleared while changing PCI device
- F6 PCI list changes (PCI Express) to PCIe
- Fix RU.EFI save/open file failed if CDROM or NTFS drive is present
- RU /D ACPI: Display the saving file information more clearly
- ALT-6 ACPI table list now list OEM ID, OEM Table ID and Creator ID.
- Fix wrong ACPI table checksum bad information if the length > 0xffff
- Fix ALT-F1 mass storage does not list partitions in correct hierarchy tree
- Fix saved file can't be exchanged between RU.EXE and RU.EFI
- Some UI fixes
- Every version of RU has it own bugs simply because I did not test it fully. Please leave comments here if you find any bug.
- RU.EXE are not tested at all.
Password: 174105371023
Hello, screen capture of File is not good.
回覆刪除https://i.imgur.com/1wpRqLl.png
Hi Richi,
回覆刪除I have fixed it and the new version will be released soon.
Thanks for letting me know this bug.
您的程序是否支持其他BIOS供应商? INTEL E3800处理器SATA控制器未在PCI设备中列出。
回覆刪除Hello,
回覆刪除1. RU supports all IBV, you can use it on any BIOS.
2. I will update the name of PCI list for that SATA controller.
Thanks!
Hi James,
回覆刪除Here is a bug that highlight area is incorrect in SMBIOS.
https://i.imgur.com/fWRxAM0.png
Gary
Hi Gary,
回覆刪除It is from RU.EXE, how about RU.EFI?
Hi James,
回覆刪除Same, failed.
https://i.imgur.com/t8OTmFO.png
Gary
Hi Gary,
回覆刪除I can reproduce it and fixed it. It happens only use page up/down to navigate types. Thanks!
RU.EFI Close SIO Confi. and Open SIO Confi. seems reverse in 5.20.0328 Beta.
回覆刪除Hi Zeno,
回覆刪除Do you mean that RU close the SIO config after exiting?
Hi James,
回覆刪除https://i.imgur.com/3APNfzC.png
Steps: Config > SMBUS > SPD
It's a screen capture of DDR4 shown in RU. You may observe that some information is incorrect in list mode. Otherwise, under extended page (>= offset 256), Alt-L is not allowed.
Gary
Hi Gary,
回覆刪除Thanks for the testing, I will fix it.
Hi James,
回覆刪除1. Go to CMOS space 0x70 / 0x71.
2. Turn of refresh by Ctrl -.
3. Move cursor to offset 0xC, which is a read only.
4. This register will be kept reading. However, the proper behavior shall be doing nothing. If user would like to change the value, just write and read once separately.
Gary
Hi Gary,
回覆刪除I made the focused data still updated on purpose. This was done from the very beginning. I can change it not to updated if refresh is OFF.
Hi James,
回覆刪除Thanks. This change shall be good to prevent further action to focused registers since refresh is off.
Gary