I use Ru4.78 on a ibex peak system (which has many pci device on it). Press F6 to display the pci list, and scroll to next page, the next page do not show pci device listing. Actually, I think the root cause if the PCI device has reach third page, so there is a problem to dispaly the pci devices.
I used RU 4.78. Notice there is problem on default ibex peak platform, insert some PCI devices on the board, make sure the total PCI devices listing more than 3 pages, I have this symptom when scroll to next pages.
I had attached a picture which indicate listing PCI device has problem on http://picasaweb.google.com/lh/photo/ou7jd-ZFinyNKQo6FaXCjA?authkey=Gv1sRgCKbswam_3fK37wE&feat=directlink .
Could you please tell me what website can be download ru478.exe?
回覆刪除Thanks!
I have uploaded v4.78 to download page.
回覆刪除I use Ru4.78 on a ibex peak system (which has many pci device on it). Press F6 to display the pci list, and scroll to next page, the next page do not show pci device listing. Actually, I think the root cause if the PCI device has reach third page, so there is a problem to dispaly the pci devices.
回覆刪除I will try Ibexpeak. Thanks.
回覆刪除Double Chiang,
回覆刪除I checked the Ibexpeak board and RU lists all the PCI devices.
Do you mean the older version of RU can list them all?
Have you tried to manually input the Bus/Dev/Func number and found that device not in the F6 list?
I used RU 4.78. Notice there is problem on default ibex peak platform, insert some PCI devices on the board, make sure the total PCI devices listing more than 3 pages, I have this symptom when scroll to next pages.
回覆刪除Before I tried 3 pages, can you clarify if you can manually read the PCI by entering BUS/DEV/FUNC?
回覆刪除There is no problem to read single pci device.
回覆刪除I had attached a picture which indicate listing PCI device has problem on http://picasaweb.google.com/lh/photo/ou7jd-ZFinyNKQo6FaXCjA?authkey=Gv1sRgCKbswam_3fK37wE&feat=directlink .
Notice the yellow bar is the cursor bar.
Hi Double,
回覆刪除I think I missed your reply for a long time. I will try to simulate the problem you have.
It seems there is an alignment problem.